Double Glazing Locks Repair
When a double-glazed window will not close, it creates draughts that allow valuable heat to escape. This can also compromise the security of your home and puts you at greater chance of being burglarized.
Double-glazed window seals, hinges, and handles can become damaged over time. If this happens, it can affect how your windows work and could invalidate any warranty you have.
Locks that aren't working
Many people install anti-burglar devices on their main doors and gates However, they tend to overlook that windows are prime targets for burglars. Having faulty locks can lead to draughts in the house, allow valuable heat to escape and weaken your home's security barriers.
If you find that your uPVC window locks aren't working, there's a good chance that the mechanism for locking is stuck. This is typically caused by a split in a gearbox component. This can cause the handle to turn 360 degrees but not open. This is a common issue with uPVC casement windows, but can also be seen in tilt and turn windows, and even sliding sash windows.
If this happens you can release the lock by applying pressure to the lever handle. This will unblock the gearbox and then restore the window's opening. If this method does not work, you may need to replace the window lock mechanism completely.
Most modern uPVC windows use espagnolette locks. These are internal locking systems that secure the window using mushroom-shaped locking cams that are inserted into the frame keep. The handle is the one that operates the gearbox that then triggers the cams to either move up or down. A common issue is when the spindle on the lock has broken which causes the handle to rotate freely, but not move the window open or shut.
A malfunctioning transmission may make your window appear to be locked but it's not. This can occur when the rods in the centre, also referred to as crocodile teeth fixings in the gearbox are snapped off. If this is the situation, Misty Glaze can supply and install replacement rods to restore the operation of your window.
double glazing repair is important to not force a stuck or broken lock. This could cause the lock to snap or break, especially with a uPVC window as it expands and expands as it warms and cools. It is recommended to contact a professional locksmith who can determine the issue and repair it.
Sticky Doors/Window
It's annoying to find doors and windows that don't close and sag, but they can be a sign of more serious structural issues. If you find it difficult to open or close a door or window it is important to seek professional help immediately. These issues can be a result of a variety of things, including foundation settlement and inadequate support for crawl spaces.
Windows and doors can get stuck due to humidity or the frame itself. If your frames are wood, for instance, they may warp when exposed to moisture. Even if your hardware appears good, this can make it difficult to open and close your frames. In this case the wood expands and presses against the hinges, causing friction.
Rub the door or window with soap to reduce friction if it sticks in the summer. This will help it shrink and can resolve the issue temporarily. This method will need to be repeated frequently during periods of high humidity.
Sanding the frame of the window or door to a smooth finish is a more permanent solution. This can be done by hand or using an electric tool. A professional can also stain, sand and paint your door or window frame to make it look like new.
If soaping or sanding don't help, your problem may be caused by foundation settlement or a weak crawlspace. Look for cracks in the area. It's time for you to consult an expert in foundations when you spot any of these indications. Damage to the foundation can result in uneven floors, a misaligned wall and doors that are stuck. To avoid costly and dangerous repairs, it's important to address these issues as soon as you can. These issues can get worse until your home becomes structurally unstable if left unattended. Call the Southeast's top foundation repair specialists to schedule an inspection today!
Cracking/Blowing Issues
Cracks can appear when double glazing begins to degrade. It can be unappealing and it also allows all the heat that has been built up in your home to escape. It could also pose a safety risk for your family, as the glass's sharp edges could cause injuries in the event that they break. It is recommended to fix any double glazing windows that show cracks before they get worse, since this could increase the cost of replacing them.
Window seals are crucial for keeping air in between your window panes and they also stop drafts from entering your home. Over time, these seals can shrink or get damaged due to changes in the weather. Unchecked, it can lead to moisture, condensation, and draughts in your home.
This issue can usually be resolved by an expert. They will be able to replace the window seal and get your windows back to their original state. They will also suggest features that can reduce the risk of stress cracks, for example trickle ventilation for better air circulation.
You can also grease the handles and hinges on your doors and windows. This will enable them to move more smoothly and let the lock perform as it was intended. Rub some lubricating oil on a cloth that is free of lint and then rub them into the hinges or handle mechanism, as well as areas where they pass through frames (for example for sash window). You can also remove the handles and clean them in warm soapy water to remove any dirt or dirt.
It is crucial to contact a professional if your uPVC windows and doors aren't working as they should. They can identify the problem quickly and repair it in a brief time. It's a lot safer and more affordable than attempting to fix the issue yourself and potentially damaging the mechanism. You'll also be able to rest in peace of mind knowing that your home is secure and secure.